GGPChat

The most recent JORC from 25th January 2023 described the Eastern Breccia within Havieron thus:-

......over 500m in strike, up to 200m in width, and over 250m in vertical extent.

The Eiffel Tower in Paris is a bit over 300m tall, with legs 125m from tip to tip.


So, you could fit four Eiffel Towers side by side (4 x 125m = 500m); and be on the verge of being able to stack them two deep (2 x 125m = 250m, we need only 200m); and give their 300m height a little trim to reach the 250m vertical depth.... and that is the size of just the Eastern Breccia (at the moment).

I decided to go back and see how the Eiffel Tower scale looks over time..... not all that easy, but ......

Beware that scales change, some JORC sections (where these images are taken from) didn't have any scales, and each JORC had its own latest discovery to highlight - so my attempt to always show the longest dimension across the ovoid was thwarted.

Despite all this you'll get my drift - HAV from the outset was always huge!




July 2019



December 2019



April 2020



July 2020



December 2020



April 2021



June 2021



December 2021



April 2022



June 2022



December 2022



January 2023


You'll probably spend a lot more time walking around the base of the Eiffel Tower next time you are there.

Just a perdantic thought about tip to tip! If it is 125m tip to tip doesn't that make the distance between adjacent legs nearer 100m? So can you get more 'across' in the Havieron hole?

strudel wrote: ↑Sat Jan 28, 2023 10:11 pm The most recent JORC from 25th January 2023 described the Eastern Breccia within Havieron thus:-

......over 500m in strike, up to 200m in width, and over 250m in vertical extent.

The Eiffel Tower in Paris is a bit over 300m tall, with legs 125m from tip to tip.


Eiffel Tower with dimensions.jpg


So, you could fit four Eiffel Towers side by side (4 x 125m = 500m); and be on the verge of being able to stack them two deep (2 x 125m = 250m, we need only 200m); and give their 300m height a little trim to reach the 250m vertical depth.... and that is the size of just the Eastern Breccia (at the moment).

I decided to go back and see how the Eiffel Tower scale looks over time..... not all that easy, but ......

Beware that scales change, some JORC sections (where these images are taken from) didn't have any scales, and each JORC had its own latest discovery to highlight - so my attempt to always show the longest dimension across the ovoid was thwarted.

Despite all this you'll get my drift - HAV from the outset was always huge!




July 2019


3 HAV Section Jul 2019.jpg



December 2019


5 HAV Section Dec 2019.jpg



April 2020


7 HAV Section Apr 2020.jpg



July 2020


9 HAV Section Jul 2020.jpg



December 2020


11 HAV Section Dec 2020.jpg



April 2021


13 HAV Section Apr 2021.jpg



June 2021


15 HAV Section June 2021.jpg



December 2021


17 HAV Section Dec 2021.jpg



April 2022


19 HAV Section Apr 2022.jpg



June 2022


21 HAV Section June 2022.jpg



December 2022


23 HAV Section Dec 2022.jpg



January 2023


25 HAV Section Jan 2023.jpg


You'll probably spend a lot more time walking around the base of the Eiffel Tower next time you are there.

Rising to the pedantry challenge, one of my favourite hobbies.....

Google assured me what the dimensions are. The tower has a square base so the outer edge of the legs are 125m apart on both length and width dimensions.

I had considered trying to do a 3-dimensional version but feared you wouldn't be able to see the Havieron because of the clutter from so many Eiffels.

Surely there are opportunities to fit some in upside down between the existing eiffel towers?

strudel wrote: ↑Sun Jan 29, 2023 10:01 am Rising to the pedantry challenge, one of my favourite hobbies.....

Google assured me what the dimensions are. The tower has a square base so the outer edge of the legs are 125m apart on both length and width dimensions.

I had considered trying to do a 3-dimensional version but feared you wouldn't be able to see the Havieron because of the clutter from so many Eiffels.

... I think you are asking for the equivalent of an increase in ore purity with the suggestion of upside down Eiffels filling the gaps?

I'll stick to one Eiffel per 125 x 125 m x 300m volume for now.

I may adjust in the future after seeing more in-fill drilling results.

WOW,
Alway thought Hav would be HUGE.

Sitting here in Spain, not Paris, on the coast and it is raining so catching up with bits.

I did think that Madrid being the highest capital city in Europe is up high.

657 metres high, then realised due to this post.

It is only 2 Eiffel Towers, just shows high high the Eiffel Tower is, amazing.

Imaging saying you are going to mine down from Madrid to sea level, sounds crazy but that is what GGP are going to do, and a lot lot deeper, 3 times from surface and more.

Got to go Sun is back out, not very warm 15 degree warm when protected from the breeze but warmer than England.